Dovetail Slides – HS/HSD Series
Dovetail Slides – HS
Dovetail Slides – HSD
Our heavy service dovetail slides feature bases and saddles of heavier sections to withstand heavier forces and moment loads. The extra thickness also allows for additional mounting provisions.
Our HS / HSD series dovetail slides feature:
- Extra-heavy, stress relieved cast iron base and saddle for maximum stability
- Precision ground exterior surfaces
- Standard lubrication provisions
- Precision ground straight gib
- Each slide is factory-adjusted and tested prior to shipment
Heavy Service Dovetail Slide Dimensions |
||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dimensions in Inches | ||||||||||||
| Model | Width W | TR | TW | HT | BH | SH | SL | BL | Gib Screws | Gib Screw Spacing | Weight (lb) | |
| S | E | |||||||||||
| HS4-6-8 | 4 | 2 | 5.13 | 2.13 | 1.38 | 1.38 | 8 | 6 | 5 | 1.63 | .75 | 15.8 |
| HS4-8-12 | 4 | 5.13 | 2.13 | 1.38 | 1.38 | 12 | 8 | 7 | 1.68 | .94 | 22 | |
| HS6-8-12 | 6 | 4 | 6.81 | 2.88 | 1.50 | 2.00 | 12 | 8 | 7 | 1.68 | .94 | 46 |
| HS6-10-16 | 6 | 6.81 | 2.88 | 1.50 | 2.00 | 16 | 10 | 9 | 1.81 | .75 | 60 | |
| HS8-12-18 | 8 | 6 | 8.81 | 3.13 | 1.88 | 2.00 | 18 | 12 | 9 | 2.00 | 1.00 | 97 |
| HS8-16-24 | 8 | 8.81 | 3.13 | 1.88 | 2.00 | 24 | 16 | 12 | 2.00 | 1.00 | 130 | |
Heavy Service Dovetail With Drive Screw Dimensions |
||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dimensions in Inches | ||||||||||||||
| Model | Width W | TR | TW | HT | BH | SH | SL | BL | TL | Gib Screws | Gib Screw Spacing | Leadscrew Drive | Weight (lb) | |
| S | E | |||||||||||||
| HS4-6-8-L(_) | 4 | 2 | 4.81 | 2.13 | 1.38 | 1.38 | 8 | 6 | 11.88 | 5 | 1.63 | .75 | 1/2-20 Vee or 1/2-10 Acme RH | 16.5 |
| HS4-8-12-L(_) | 4 | 4.81 | 2.13 | 1.38 | 1.38 | 12 | 8 | 15.88 | 7 | 1.68 | .94 | 22.75 | ||
| HS6-8-12-L(_) | 6 | 4 | 6.81 | 2.88 | 1.50 | 2.00 | 12 | 8 | 16.63 | 7 | 1.68 | .94 | 5/8-20 Vee or 5/8-10 Acme RH | 48 |
| HS6-10-16-L(_) | 6 | 6.81 | 2.88 | 1.50 | 2.00 | 16 | 10 | 20.63 | 9 | 1.81 | .75 | 62.5 | ||
| HS8-12-18-L(_) | 8 | 6 | 8.81 | 3.13 | 1.88 | 2.00 | 18 | 12 | 23.06 | 9 | 2.00 | 1.00 | 3/4-20 Vee or 3/4-10 Acme RH | 103 |
| HS8-16-24-L(_) | 8 | 8.81 | 3.13 | 1.88 | 2.00 | 24 | 16 | 29.06 | 12 | 2.00 | 1.00 | 145 | ||
On slides that offer a leadscrew choice, put “V” in parenthesis for Vee thread lead screw, “A” for Acme.